Note! The device SIM-card must be active and the device must be connected to the mobile network (does not apply to Avius)
Ultracom R10 Hybrid firmware version: B6.1
Date: 3.1.2022
Update content:
- Country setting change corrected
- Battery charge level measurement correction (the device could display two different battery charge levels)
- Other minor fixed and improvements.
Note! The device SIM-card must be active and the device must be connected to the mobile network.
Update instructions on Ultracom Next or Tracker app:
- Install a charged battery to the device. Note the (+) and (-) markings on the battery and the battery casing.
- Wait that the green LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
- Open the app and open the main menu.
- Select "devices" and select your Hybrid device.
- Select "Firmware update" and read more instructions from the screen.
- The device will receive the command and start the firmware update.
- When the update is complete, the device will continue to send the location.
- To update the VHF-receiver:
- Next: open the main menu and select "settings"
- Tracker: open the main menu and select devices.
- Select the VHF-receiver and select "Firmware update".
- The app downloads the firmware update and sends it to the VHF-receiver. Green and blue led on the receiver will blink simultaneously.
- When the device has been successfully updated the receivers lights will continue to blink normally and it will form a Bluetooth-connection to the app.
Date: 1.13.2021
Update content:
- Delays when the Ultracom Global SIM-card changed the operator is fixed.
Note! The device SIM-card must be active and the device must be connected to the mobile network.
Update instructions on Ultracom Next or Tracker app:
- Install a charged battery to the device. Note the (+) and (-) markings on the battery and the battery casing.
- Wait that the green LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
- Open the Ultracom Next or Tracker app and open the main menu.
- Select "devices" and select your R10 device.
- Select "Firmware update" and read more instructions from the screen.
- The device will receive the command and start the firmware update.
- When the update is complete, the device will continue to send the location.
Ultracom Avius host device firmware version: 1.016
Date: 1.13.2021
Update content:
- Sending of VHF commands were sometimes slow, or the device could not send the commands is now fixed.
Updating the VHF receiver from the Ultracom Next or Tracker app:
- Insert charged battery to the VHF-receiver and turn the device on.
- Open the app main menu
- Next: select "settings".
- Tracker: select "devices"
- Select the VHF-receiver and select "Firmware update".
- Input the security code to the indicated field and the update will start.
- The app downloads the firmware update and sends it to the VHF-receiver. Green and blue led on the receiver will blink simultaneously.
- When the device has been successfully updated the receivers lights will continue to blink normally and it will form a Bluetooth-connection to the app.
Date: 6.2.2017.
Update content:
- Minor updates.
Update instructions on Ultracom Next and Tracker app:
- Install a charged battery to the device. Note the (+) and (-) markings on the battery and the battery casing.
- Wait that the orange LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
- Open the app and open the main menu.
- Select "devices" and select your Novus device.
- Select "Firmware update" and read more instructions from the screen.
- The device will receive the command and start the firmware update.
- When the update is complete, the device will continue to send the location.
Ultracom Dog-GPS firmware version: 19
Date: 2.24.2020
Update content:
- Fixed: battery level indication.
- Fixed: GPS power save.
Note! The device SIM-card must be active and the device must be connected to the mobile network.
Update instructions on Ultracom Next or Tracker app:
- Install a charged batteries to the device. Note the (+) and (-) markings on the battery and the battery casing.
- Wait that the orange LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
- Open the app and open the main menu.
- Select "devices" and select your R10 device.
- Select "Firmware update" and read more instructions from the screen.
- The device will receive the command and start the firmware update.
- When the update is complete, the device will continue to send the location.