Artemis - LED-lights and what they mean

Modified on: Thu, 18 Jan, 2024 at 10:34 AM

LED LIGHT

LOCATION OF LED LIGHTS

1. Telecommunication

2. Basic operation

3. Charging

1. TELECOMMUNICATION LED

LIGHT

ACTION

█ █ █ …

Connection failure:

Make sure your Artemis SIM has usage time: Tracker app > device settings > Artemis SIM

If the uptime is Ok, contact support or service.

2. BASIC OPERATION LED

STARTUP	ACTION
█ …nothing else	The battery of the device is completely discharged.
█ █ ... nothing else	The battery of the device almost discharged.
█ … █ … █ █ █ █ █ █ █ █ …	The device turns On and starts searching for satellites and the network
█ █ █ █ …	Device ready for use
OPERATIONAL	ACTION
█ █ …	Searching for a data connection
█ █ █ …	Searching for a satellites
█ █ █ █ …	Searches for data and satellite connection
█ █ █ █ …	Everything OK
SHUTTING DOWN	ACTION
██ (9 pcs) ███████	Wait for the indicator light to lights continuously and unpress the power switch. The device is completely turned off when the indicator shuts down.

3. CHARGING LED

CHARGING	ACTION
█████ …	Charging
█████…	Battery almost full
█ █ █ …	Charging failure: Battery is too cold, bring the device to room temperature and wait until you start charging normally. Poor contact, make sure the charging cable is intact and the charging connection is firm. Charger power output too weak, try another charger. Battery broken

ALL INDICATOR LIGHTS AT THE SAME TIME

LIGHT	ACTION
█ █ █ …	Recording voice clip

*1. Plug in the charger. If no indicator lights up, wait for at least 3 hours.

2. Disconnect from the charger and wait for more than 2 minutes.

3. Reconnect to the charger and observe if the normal charging sequence begins.

4. If the charging starts, let it charge fully as usual.

5. If it doesn't start, wait for 2 minutes and start over from step 1. Sometimes the battery may require several such recovery cycles to revive.