Ultracom Novus and Dog-GPS firmware updates

Update instructions on Tracker app:

1. Install a charged battery to the device. Note the (+) and (-) markings on the battery and the battery casing.
2. Wait that the orange LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
3. Open the app and open the main menu. 
4. Select "Devices" and select your Novus device.
5. Select "Firmware update" and read more instructions from the screen. 
6. The device will receive the command and start the firmware update.
7. When the update is complete, the device will continue to send the location.

Note! The device SIM-card must be active, and the device must be connected to the mobile network.

Update instructions on Tracker app:

1. Install charged batteries to the device. Note the (+) and (-) markings on the battery and the battery casing.
2. Wait that the orange LED-light on the device starts to blink once per second. If the device finds satellites, the light will blink once per three seconds.
3. Open the app and open the main menu. 
4. Select "Devices" and select your R10 device.
5. Select "Firmware update" and read more instructions from the screen. 
6. The device will receive the command and start the firmware update.
7. When the update is complete, the device will continue to send the location.